【Product Introduction】

Slitter and Rewinder
—Biaxial Center and Surface Slitting

Introduction of accessories:
1. Winding power section: two winding motor and main engine motor to be used as three-motor movement control. The main engine motor is to cut off the emptying and control the tension of winding motor, to make the tension of finished paper is steble and the appearance is artistic.
2. Winding mechanical section: winding rocker adopts pneumatic linkage to control balance. It can automatically adjust the contact pressure. The contact pressure can also be set by customer. The machine can also be selected with intermittent winding to slit more extensive other materials.
3. The motor control section: the operating interface uses LCD touch screen, it can be directly to set a variety of winding conditions and transport conditions. The control part uses the programmable controller to carry on the mechanical movement control. It has the self - detecting system that it can automatically diagnose when machine has error.
4. Emptying form: separating type emptying machine with larger diameter, so it can possibility install other devices.

Optional configuration：
1. Raw material feeding: it adopts oil pressure power, suitable for workshop without driving, can save manpower and shorten the feeding time
2. Emptying with noise hood: reduce the production noise and improve the quality and safety of working environment.
3. Remaining material processing device: equipped with strong windmill apply to the non-viscous materials.
4. Automatic alignment section: it is suitable for cutting after printing. It can precisely align with printing base line and then proceed to slit.

Technical characteristics:
Mechanical Struction
Splitting tool Upper and under cutter Barometric circular knife Industrial knife
Reeling type Centric reeling Surface reeling Centric + surface reeling
Emptying type Continuous Separating Shaftless
Store issue type Sync reeling Winding displacement reeling Air blast

Machine width 1.3M-3M
Max unreeling diameter Φ650-800mm
Max feeding diameter Φ800-1500mm
Min slitting diameter 50mm
Max production speed 300-600m/min
Reeling tube core diameter 3" 6"